Ultramite Gear Drives

Falk Ultramite Concentric Inline Gear Drives
Falk Ultramite Concentric Inline Gear Drives are built for longer service life. An
integral high-speed pinion is fully supported by bearings within the gearbox, not
by motor bearings, while dual lip seals prevent contamination.
Ultramite is motor-independent allowing the use of standard NEMA C-face or IEC
motors. The innovative motor bushing eliminates fretting between the motor and
the gear drive. This design offers easy installation and allows for quick, trouble-
free change out, even after years of hard, continuous use.
Multiple mounting positions are available, including base, wall, top, vertical, shaft
and flange. Falk Ultramite Gearmotors have continuous-duty ratings from the
American Gear Manufacturers Association (AGMA).

Additional information

Benefits	– C-face motor for ease of installation and removal – 13 sizes – Up to 183,000 lb-in (20 kNm) – 0.25 – 300 hp (.19 – 225 kW) capacity – Reductions from 1.4:1 to 16,000:1 – Base and flange mounted designs – 3-year warranty The UC Ultramite Inline product line offers flange or footed housing options. Units include a motor adapter for ease of installation and removal of a standard NEMA C-Face motors.
Technical data	The Falk Ultramite UC Inline Helical size 09 gear drive has ratio range of 1.4 – 10,000 and a max torque of 25,300 inch pounds up to ratio range of 3.6 – 10,000 and a max torque of 15,000 inch pounds.

Benefits

– C-face motor for ease of installation and removal
– 13 sizes
– Up to 183,000 lb-in (20 kNm)
– 0.25 – 300 hp (.19 – 225 kW) capacity
– Reductions from 1.4:1 to 16,000:1
– Base and flange mounted designs
– 3-year warranty
The UC Ultramite Inline product line offers flange or footed housing options. Units include
a motor adapter for ease of installation and removal of a standard NEMA C-Face motors.

Technical data

The Falk Ultramite UC Inline Helical size 09 gear drive has ratio range of 1.4 – 10,000
and a max torque of 25,300 inch pounds up to ratio range of 3.6 – 10,000 and a max
torque of 15,000 inch pounds.